Product Information

CULTEX® LTC-C

If you are interested in this product, you can
Product Name: CULTEX® LTC-C
Product Type: CULTEX® LTC-C
Exhibitors: CULTEX
Product Documentation: No Related Documents

Brief

Advanced Long-Term Cultivation-CULTEX® LTC-C was designed to automatically supply cell cultures with medium at different time intervals over longer periods of time (weeks).


CULTEX® LTC-C  A detailed description of

Advanced Long-Term Cultivation- CULTEX® LTC-C (LongTermCultivation – Continuous) was designed to automatically supply cell cultures with medium at different time intervals over longer periods of time (weeks). In such a way epithelial cells of the respiratory tract, for example, can be used for toxicological studies both in an undifferentiated and differentiated stage of cell development. Medium exchange as well as medium agitation and mixing are computer-controlled to avoid staff dependent variations during the cultivation process. 

For an optimized cultivation process with high reproducibility

The equipment consists of the incubator module and a supply unit, which can be operated under cell-specific conditions in a CO2 incubator. The incubator module can hold up to 24 cell culture inserts (e.g. COSTAR® or FALCON®, size 12 mm) and is connected with the control unit via two tubes and two electric connector cables.

The control unit is placed outside the CO2 incubator. Integrated to the control unit, there is a programmable logic controller (PLC) as well as a pump for the supply of medium to the incubator module and a pump for the removal of the medium. The pumps are located inside the control unit in a sliding cassette, the LH module (LH = Liquid Handling), where they are easily accessible for maintenance and sterilization.

The control unit is equipped with an integrated web server. Visualization of the procedures and measured data is carried out by a web browser, e.g. via a laptop computer. The controls can also be accessed via the web browser, to change settings, for instance. The computer itself does not carry out any control tasks, whereby the management of the cell cultures continues even if the computer operating system breaks down.

The fully automated CULTEX® LTC-C requires less manual work compared with standard cell culture work, saves manpower and removes the individual influence of the worker.
     

Design and handling

·         Operation of the CULTEX® LTC under cell-specific conditions inside a CO2incubator

·         Control unit outside the CO2 incubator

·         Preheating of the fresh medium by an heat exchanger in the control unit

·         Air bubble precipitator

·         All cell or medium housing components of the system are autoclavable

Performance

·         Requires less manual work and saves manpower

·         Continuous as well as intermittent medium supply of the cultures

·         Computer controlled medium exchange (volume fractions or the total volume of the incubator module)

·         Computer controlled circulation of the medium via a mixing disc

·         Control of the medium level by an ultrasonic pulse-echo sensor

 

Leave a message for product
Title
Contact
Tel
Content
Verify Code
Click to change
Note:1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!